我的购物车
  • 林肯焊机自保护焊枪K345
  • 林肯焊机自保护焊枪K345

林肯焊机自保护焊枪K345

联系该企业时请说明您是在《制冷名录》看到该信息,以获得更多的信任和更好的服务。
价格:电议
进店看看>
上海豪量商贸有限公司
  • 联系人:王生
  • 点击获取联系方式
  • 地区:上海
产品分类
热销产品
Innershield Gun 350A
Flux-Cored Self-Shielded Gun and Cable Assembly
K345-10 350A FCAW-SS 90 deg Noz 10 ft 068-5/64

Lincoln has been manufacturing semiautomatic flux-cored, self-shielded (FCAW-S) gun and cable assemblies for over 40 years. Magnum self-shielded guns are rugged and reliable, yet lightweight, flexible and maneuverable. Amperage ranges from 250 to 600 amps. From the smallest repair to the largest fabrication job, Lincolns flux-cored, self-shielded (FCAW-S) guns are a great choice.

Advantage Lincoln
    • Heavy-duty gun trigger switch for positive electrical contact and long life.
    • Reinforced rubber jacket adds strength and long life to cable.
    • Alternate gun tubes are available for selected guns to reach welds with limited accessibility.
    • All guns are rated at 60% duty cycle and meet NEMA specification EW3.
    • K115, K116 and K126 are recommended for direct use with the LN-7, LN-8, LN-9, LN-25 and LN-35 Lincoln wire feeders.
    • LF-72, LN-10, DH-10, LN-15, Power Feed 10, Power Feed 10 Dual, and Power Feed 15 wire feeders require K1500-1 Feed Plate Gun Bushing to connect K115, K116 and K126 Guns.
    • K264, K345, K355 and K361 are for the LN-23P wire feeder only.

K115: 
      Rated 450 amps. Use .068-.120" (1.7-3.0mm) diameter wires. Choose from 10 or 15 ft. (3 or 4.5m) cable lengths.


K116: 
      Rated 600 amps. Use 7/64-.120" (2.8-3.0mm) diameter wire. 15 ft. (4.5m) cable length. Adjustable grip angle.


K126: 
      Rated 350 amps. Use .062-3/32" (1.6-2.8mm) diameter wires. Choose from 10 or 15 ft. (3 or 4.5m) cable lengths.


K264, K355: 
      Rated 250 amps. Use .068-5/64" (1.8-2.0mm) diameter wires. Cable for K264 is 8 ft. (2.4m) in length. Cable for K355 is 10 ft. (3.0 m) in length. Reduced wire feed speed thumb switch.


K345, K361: 
      Rated 350 amps. Use .068-5/64" (1.8-2.0mm) diameter wires. Both cables are 10 ft. (3m) in length. Reduced wire feed speed thumb switch.

Physical Specifications
Weight:10 lbs. (4.5 kgs. )
Dimensions (in) H x W x D : 4.25 x 18 x 23.83
Dimensions (mm) H x W x D : 108 x 457.2 x 605.3
 


WHERE TO BUY
MORE PRODUCT INFO(pdf)
CCC CERTIFICATE
MADE IN USA
 
Processes
Flux-Cored Self-Shielded

Gun Specifications
Gun Tube Angle Duty Cycle at Rated Amperage Wire Diameter in (mm) Cable Length Rated Amperage
90 0.6 .068-5/64 (1.7-2.0) 10 ft. 350
自保焊枪(250安电流)
药芯焊丝自保焊枪和电缆组件
K355-10 250安 药芯焊丝自保焊枪90 度喷嘴10英尺068-5/64

林肯在制造生产半自动药芯焊丝和自保焊枪以及电缆组件上已有40多年的历史。Magnum自保焊枪不但坚固耐用、性能可靠,而且重量轻,具有较高的灵活性。焊枪所能承载的电流范围为250-600安。无论在小的修补工作上,还是在的生产车间里,林肯的药芯焊丝自保焊枪都是您的选择。

优点
  • 大电流焊枪扳机开关便于获得良好的导电性和较长的使用寿命。
  • 附加的电缆橡胶套增强了电缆的强度和使用寿命。
  • 可选配适当的焊枪以便焊接难以到达的焊接区域。
  • 所有焊枪的额定电流均是在60%暂载率时获得的,满足NEMA 规范 EW3。
  • K115、K116 和K126被推荐与 林肯的LN-7、 LN-8、LN-9、 LN-25和LN-35 送丝机配合使用。
  • LF-72、 LN-10、 DH-10、LN-15、Power Feed 10、 Power Feed 10 Dual和Power Feed 15 送丝机需要K1500-1 焊枪套管去连接K115、 K116和K126 焊枪。
  • K264、K345、 K355和K361 仅适用于LN-23P 送丝机。

    K115:额定焊接电流为450 安。采用直径为.068-.120英寸(1.7-3.0毫米) 直径的焊丝。可选择10或15英尺(3或4.5米)长度的电缆。

    K116额定焊接电流为600安。采用直径为 7/64-.120英寸 (2.8-3.0毫米) 直径的焊丝。15英尺(4.5米) 长的焊接电缆。可调节焊枪把手角度。

    K126 额定焊接电流为350安。采用直径为.062-3/32英寸(1.6-2.8毫米) 直径的焊丝。可选择10 或15 英尺(3 或4.5米) 长度的电缆。

    K264, K355: 额定焊接电流为250安。采用直径为 .068-5/64英寸 (1.8-2.0毫米) 直径的焊丝。与K264相配的电缆长度为 8 英尺(2.4米) ,与K355相配的电缆长度为10英尺(3.0米) 。简化的送丝速度按钮开关。

    K345, K361:额定焊接电流为350安。采用 .068-5/64英寸 (1.8-2.0毫米) 直径的焊丝。两种电缆长度均为10英尺(3米)。简化的送丝速度按钮开关。

重量尺寸
净重:9磅(4.1公斤)
外形尺寸(英寸)高x宽x深:4.25x18.25x24
外形尺寸(毫米)高x宽x深:108x463.6x609.6
 


哪里购买
更多产品信息(pdf)
CCC证书
 
工艺
药芯焊丝自保焊

焊枪技术参数
焊枪管角度 额定焊接电流时的暂载率 焊丝直径
英寸(毫米)
电缆长度 额定电流
90 0.6 .068-5/64 (1.7-2.0) 15英尺 250


好评度
{{GoodNumPer}}%
{{item.LabelTitle}}
  • 全部评价({{AppraiseStatistics.AllNum}})
  • 好评({{AppraiseStatistics.GoodNum}})
  • 中评({{AppraiseStatistics.MidNum}})
  • 差评({{AppraiseStatistics.BadNum}})
  • 晒图
同类推荐