Frame plate
Mild steel, Epoxy painted
Nozzles
Carbon steel
Metal lined: Stainless steel, Titanium
Plates
Stainless steel Alloy 316 or Titanium
Gaskets
Nitrile, EPDM or HeatSealF?
TECHNICAL DATA
Pressure vessel codes, PED, ASME, pvcALS?
Mechanical design pressure (g) / temperature
FG PED 1.6 MPa / 180°C *)
FG pvcALS? 1.6 MPa / 180°C
FG ASME 150 psig / 350°F
FD PED 2.5 MPa / 180°C
FD ASME 300 psig / 350°F
*) Frame FG also approved for 1.2 MPa / 200?C to allow use in steam systems
without safety valves.
CONNECTIONS
FG PED Size 65 mm DIN 2501 PN16
FG pvcALS? Size 65 mm DIN/GB/GOST PN16, JIS 16 K
FG ASME Size 3" ASME CI. 150
FD PED Size 65 mm DIN 2501 PN25
FD ASME Size 2?" ASME CI. 300
Maximum heat transfer surface
13 m2 (140 sq. ft)
Flow principle of a plate heat exchanger
Dimensions
Measurements mm (inch)
Type H W h
TS6-FG 704 (2723/32") 400 (16") 188 (713/32")
TS6-FD 704 (2723/32") 410 (161/8") 188 (713/32")
The number of tightening bolts may vary depending on pressure rating.
Particulars required for quotation
– Flow rates or heat load
– Temperature program
– Physical properties of liquids in question (if not water)
– Desired working pressure
– Maximum permitted pressure drop
– Available steam pressure
{{item.AppContent}}