我的购物车
  • RD-14H减压阀总代理
  • RD-14H减压阀总代理

RD-14H减压阀总代理

联系该企业时请说明您是在《制冷名录》看到该信息,以获得更多的信任和更好的服务。
价格:1000.00/台
进店看看>
上海典昭阀业有限公司
  • 查看名片
  • 联系人:黄先生
  • 电话:021-60547995
  • 手机:15026809068
  • 地区:上海
该企业为免费会员企业,工商信息未认证,请谨慎选择合作!
产品分类
热销产品
日本阀天RD-14H减压阀详细描述:
RD-14H valve is suitable for: oil, pressure 1.0Mpa following caliber range: 20-150mm Suitable temperature: 5-90 ℃ Body material: cast iron valves day Japan RD-14H is by adjusting the valve, the inlet pressure is reduced to the outlet pressure of a need, and rely on the energy of the medium itself, so that automatically maintain a stable outlet pressure valve.

RD-14H减压阀适用于:压力1.0Mpa以下的油品,口径范围:20-150mm 适用温度:5-90℃ 阀体材质为:铸铁 日本阀天RD-14H减压阀是通过调节,将进口压力减至某一需要的出口压力,并依靠介质本身的能量,使出口压力自动保持稳定的阀门。
Operation:
1, closed gate valve before the open gate valve after low pressure downstream manufacturing environment;
2, the adjusting screw counterclockwise rotation to the uppermost position (relative to the minimum outlet pressure), and then close the valve after the valve;
3. Slowly open the gate valve to fully open before;
4. Slowly turn adjustment screw clockwise, the pressure is adjusted to the desired outlet pressure (gauge pressure in the valve prevail); adjusted, the lock
Nut, open the valve gate valve;
5, such as export when adjusting the pressure higher than the set pressure, must start from the first step to re-adjust, which can only tune from low to high pressure.
日本阀天RD-14H减压阀操作方式:
1、关闭减压阀前的闸阀,开启减压阀后的闸阀,制造下游低压环境;
2、将调节螺钉按逆时针旋转至上位置(相对出口压力),然后关闭减压阀后闸阀;
3、慢慢开启减压阀前的闸阀至全开;
4、顺时针慢慢旋转调节螺钉,将出口压力调至所需要的压力(以阀后表压为准);调整好后,将锁紧
螺母锁紧,打开减压阀后闸阀;
5、如在调整时出口压力高于设定压力,须从步开始重新调整,即只能从低压向高压调。
好评度
{{GoodNumPer}}%
{{item.LabelTitle}}
  • 全部评价({{AppraiseStatistics.AllNum}})
  • 好评({{AppraiseStatistics.GoodNum}})
  • 中评({{AppraiseStatistics.MidNum}})
  • 差评({{AppraiseStatistics.BadNum}})
  • 晒图
同类推荐